2.4 00 coupe grand am new pB

[mr_eh]

http://thebadbunny.com/slip.jpg

mods @ http://www.cardomain.com/id/mr_eh

soon to be the first automatic 99+ nbody in the 15s (unless someone else alrleady did it and i dont know about it =P)

[urweak]

welcome.

Helped you out with your post and posted the right link to your cardomain site.

[AmIGrand]

Not to sound rude, but there're LOTS of v6 auto's in the 15's - many of them almost stock. Not to mention the boosted guys - blowers, turbos, N2O....

Are you a member on grandamgt.com? Check out the 1/4 time list there.

[mr_eh]

im sorry i meant the first 2.4 99+ nbody into the 15s...

yeah i know there are a ton of v6's in the 15s... not really an accomplishment when they start off in the 15s =P...

and f/i'ing a car into the 15s isnt much of an accomplishment either

[speedvisioncavalier]

well, if you put on a pulley, and perhaps a header, and a little weight reduction, you could drop into the 15s.

if you really want to start moving, i would say to hit it with about a 75 shot of nitrous. put on an MSD ignition, and go for it. you could get into the 14s.

[darkfox]

weight redux and a better 60' will get u there. I was stuck in the low 16's for a while until i leanred to get her to hook up. 2.2 second 60' will make for 15 seconds.

[darkfox]

all you have is exhaust/intake? that's pretty damn good.

[mr_eh]

yeah, its pretty much stock except for the exhaust/intake... all my mods are listed on the cardomain...

2.31 is my best 60 foot so far, trying to get it down, my next mod is either gonna be a cf hood or slipstream rims & falken azeni tires, most likely i'll be getting the rims/tires... i'll try to get both at the same time...

but yeah i am learning the car a little better, i find torque breaking to 1500 is the best to launch at, 2000 i spin too much